行業資訊
水泥撒布車的剎車系統出現問題怎么徹查
來源：http:/// 日期：2023-07-19
水泥撒布車廣泛應用于公路、鐵路、機場道路建設等領域，并可適用于水泥、白灰等各種粉料的撒鋪，大大提升了道路建設施工的效率，減少了人力消耗。下面水泥撒布車出租人員為您講解下，水泥撒布車的剎車系統出現問題怎么徹查。
Cement spreaders are widely used in fields such as highway, railway, and airport road construction, and can be suitable for spreading various powders such as cement and lime, greatly improving the efficiency of road construction and reducing labor consumption. Below, the rental personnel of the cement spreader will explain to you how to thoroughly investigate the brake system problem of the cement spreader.
1、剎車時異響
1. Abnormal noise when braking
當你踩剎車時，剎車系統會發出尖銳刺耳的金屬摩擦聲。這有可能是因為剎車片變薄、剎車片坑洼、剎車片中有異物或剎車盤生銹等導致，一般情況多踩幾腳剎車異響都會有緩解。
When you press the brake, the brake system will make a sharp and piercing metal friction sound. This may be due to thinning of the brake pads, potholes in the brake pads, foreign objects in the brake pads, or rust on the brake discs. Generally, stepping on the brake pedal a few times can alleviate the abnormal noise.
2、剎車踏板行程變長
2. Brake pedal travel becomes longer
直白點可以理解成剎車變軟。剎車行程變長的原因主要是剎車系統中進入空氣、缺少剎車油、可能存在泄漏、剎車片磨損嚴重等。
The straight white dot can be understood as the brake becoming soft. The main reasons for the longer brake stroke are air entering the brake system, lack of brake oil, possible leaks, and severe wear of the brake pads.
3、剎車跑偏
3. Brake deviation
剎車跑偏的現象不是很常見，主要體現在踩剎車時方向盤有明顯的向一側偏轉。導致這種現象的原因可能是剎車片偏磨、剎車分泵有問題等。
The phenomenon of brake deviation is not very common, mainly reflected in the obvious steering wheel deviation to one side when pressing the brake. The reasons for this phenomenon may be eccentric wear of the brake pads, problems with the brake wheel cylinder, etc.
4、剎車變硬
4. Brake hardening
很多卡友會碰到剎車變硬的問題，剎車變硬的原因主要有真空助力器故障導致剎車無助力、頻繁踩剎車后導致等造成。
Many card enthusiasts may encounter the problem of brake hardening, which is mainly caused by a malfunction of the vacuum booster, resulting in lack of brake assistance, and frequent application of the brake.
5、踩剎車時反彈
5. Rebound when braking
有不少卡友碰到過這種情況，在踩下剎車時剎車踏板有反彈頂腳的現象，這種現象多為剎車盤、剎車片表面不平、鋼圈變形等導致。
Many card enthusiasts have encountered this situation where the brake pedal rebounds when pressing the brake, which is often caused by uneven surface of the brake disc and pad, deformation of the steel ring, etc.
總而言之，水泥撒布車剎車系統存在著很多問題，當出現問題時不要不當回事兒，好能做到自己先簡單的初期排查確認問題嚴不嚴重、能不能繼續行駛到修理廠，千萬不能忽視剎車安全，因為這個關系到大家的平安。更多相關事項就來我們網站http://咨詢！
In summary, there are many problems with the brake system of cement spreaders. When problems arise, do not take them lightly, so that you can conduct a simple initial investigation to confirm whether the problem is serious, whether you can continue driving to the repair shop, and do not ignore brake safety, as this is related to everyone's safety. For more related matters, come to our website http:// consulting service
公司地址：濟南市槐蔭區經一路273號群盛華城2號樓1-404
公司名稱：山東途暢路橋工程有限公司 
備案號：